home *** CD-ROM | disk | FTP | other *** search
/ Software Vault: The Gold Collection / Software Vault - The Gold Collection (American Databankers) (1993).ISO / cdr45 / cdplay32.zip / MANUAL.WIN < prev    next >
Text File  |  1993-04-11  |  41KB  |  947 lines

  1. CDPlayer for Windows - (C)1993 Jupiter Software         Page 1
  2.  
  3. NOTICE
  4.  
  5. The information in this manual is subject to change without notice and does
  6. not represent a commitment on the part of Jupiter Software.  The software may
  7. be used or copied only in accordance with the terms of the licence agreement.
  8.  
  9. (C) 1993 Jupiter Software
  10. All rights reserved worldwide.
  11.  
  12.  
  13.  
  14. All rights are reserved.  This manual contains proprietary information
  15. which is protected by copyright.  No part of this manual may be reproduced,
  16. transcribed, stored in a retrieval system, translated into any language in any
  17. form whatsoever without the prior written consent of the publisher.
  18.  
  19. For information or support contact:
  20.  
  21. Jupiter Software
  22. 63 Parkside
  23. Wimbledon
  24. London
  25. SW19 5NL
  26. England
  27.  
  28. Tel: (+44) 081-946 4826
  29. Fax: (+44) 081-879 0090
  30.  
  31. EMail - CompuServe: 100140,2134
  32.      or pbrace@cix.compulink.co.uk
  33.  
  34.  
  35. CDPlayer for Windows - (C)1993 Jupiter Software         Page 2
  36.  
  37.  
  38.  
  39. The programs in this package are proprietary products of Jupiter Software and
  40. are protected by Copyright Law.  Jupiter retains title to and ownership of the
  41. programs.  You are licenced to use the programs for a trial period of 30 days.
  42. After this period you must either register as a user or remove the programs
  43. from your system.
  44.  
  45. Please read the Licence agreement contained in a seperate file.
  46.  
  47. CDPlayer for Windows - (C)1993 Jupiter Software         Page 3
  48.  
  49. Contents
  50.  
  51.         NOTICE
  52.  
  53.         LICENCE AGREEMENT
  54.  
  55.         CONTENTS
  56.  
  57.         A.  INTRODUCTION
  58.  
  59.         B.  BASIC OPERATIONS
  60.  
  61.             1. Run CDPlayer
  62.             2. Configuration options
  63.             3. Minimizing CDPlayer
  64.             4. Closing CDPlayer
  65.             5. The CD Handset
  66.             6. Display Area
  67.             7. Function Buttons
  68.  
  69.         C.  DISC CATALOGUE
  70.  
  71.             1. Entering/editing the record for the current disc
  72.             2. Browsing through your catalogue
  73.             3. Editing during browsing
  74.             4. Deleting a record
  75.             5. Rebuilding the database index
  76.             6. Export data
  77.             7. Import data
  78.             8. Open file window
  79.             9. Save As window
  80.  
  81.         D.  INTSTALLATION
  82.  
  83. CDPlayer for Windows - (C)1993 Jupiter Software         Page 4
  84.  
  85. A. INTRODUCTION
  86.  
  87. CDPlayer(TM) is an audio CD playing program for Windows which provides all the
  88. functions associated with a normal CD player, together with the ability to
  89. catalogue and search your CD collection.
  90.  
  91. Features include:
  92.  
  93.  
  94.     Custom programme play
  95.     Shuffle play
  96.     Single track play
  97.     Repeat on any play function
  98.     Track skip
  99.     Music search
  100.     Replay track
  101.     Pause
  102.     On screen volume control
  103.     On screen balance control
  104.     Disc catalogue allowing the storage of the following for each disc:
  105.         Disc name
  106.         Composer/artist
  107.         Music type
  108.         Disc reference
  109.         Individual track details
  110.     Browse through catalogue - with word search
  111.     On screen display of elapsed and remaining time for both the current
  112.         track and the disc.
  113.     Small handset toggle
  114.     User positioned and sizeable Handsets and Browse Window
  115.  
  116. CDPlayer for Windows - (C)1993 Jupiter Software         Page 5
  117.  
  118.  
  119. B. BASIC OPERATIONS
  120.  
  121. 1   Run CDPlayer
  122.  
  123.     You may either run CDPlayer by clicking on the CD icon in the Jupiter
  124.     program group, or by using the Run program option provided in the File
  125.     menu of the program manager.  To use the latter method, click on File and
  126.     then Run...  and enter:
  127.  
  128.           C:\CDPLAYER\PLAYER        <Enter>
  129.  
  130.     substituting a different drive and path if you have installed CDPlayer
  131.     elsewhere.
  132.  
  133.     The handset will be displayed and the system will interrogate the first CD
  134.     drive to see if a disc is loaded and if it is playing --- on most systems
  135.     play will not be interrupted by running CDPlayer.  If a disc is found the
  136.     information relating to the disc will be loaded and the handset will
  137.     display information which is relevant to it.  If no disc is found in the
  138.     first drive, the system will show an error status in the handset display.
  139.     This error status will disappear as soon as a disc is inserted into the
  140.     drive.  You may change the CD at any time without reloading CDPlayer.  The
  141.     program will register that you have switched discs and load the
  142.     information relevant to the new disc.
  143.  
  144.     You may minimize the program at any time.  The CD icon will be displayed
  145.     together with the number of the track that is playing.  This will be
  146.     updated as play progresses.
  147.  
  148. 2   Configuration Options
  149.  
  150.     If, you are happy with the default colours and database files used there
  151.     is no need to change the system configuration.  However, you may change
  152.     the colours used to display the information on the handset and the name of
  153.     the file set used to store your CD catalogue.
  154.  
  155.     Whenever CDPlayer needs to access the database it will look in the working
  156.     directory for files with the following names:
  157.  
  158.           DISCS.IX
  159.           DISCS.DAT
  160.  
  161.     If they are not found it will create these two files to store a new
  162.     database.
  163.  
  164.     If you wish to use a different directory or file name, you may by
  165.     selecting:
  166.  
  167.           File
  168.           Change database
  169.  
  170.     from the handset menu bar.
  171.  
  172.     When you select this, the Open File dialog box will appear to allow you to
  173.     enter th epath and name of the file set.  If no path is quoted the
  174.     working directory is used to store the files.  Enter the path and name you
  175.     would like to use and click on OK.  It is possible to have more than one
  176.     database stored on the disk and switch between them using this facility.
  177.     When the system is loaded it will always default to the last file set
  178.     used.
  179.  
  180.  
  181. CDPlayer for Windows - (C)1993 Jupiter Software         Page 6
  182.  
  183.  
  184.     It is also possible to change the handset colours, by selecting:
  185.  
  186.           File
  187.           Configure
  188.  
  189.     from the handset menu bar.
  190.  
  191.     When you select this, a dialogue box will appear containing a acroll bar
  192.     for each of the three prime colours and four check boxes for the four
  193.     elements which can be changed:
  194.  
  195.           Handset background
  196.           LCD text
  197.           Disk/track background
  198.           Disk/track text
  199.  
  200.  
  201.     To change any of these, click on the name of the item to be changed and
  202.     its current settings will appear on the scroll bars and in the ``Current
  203.     colour'' box.  Move the scroll bars until the desired colour has been
  204.     achieved.  As you change the colour, the effect of the change will also be
  205.     shown on the handset (this does not apply to the handset background colour
  206.     which will not take effect until CDPlayer is closed and rerun).  Once you
  207.     have created your preferred colour, you may click on another check box and
  208.     make further changes.
  209.  
  210.     Once you are happy with the colours you have selected, click on OK,
  211.     alternatively you may abandon the changes you have made by clicking on
  212.     Cancel.  In this case the handset will revert to the colours used before
  213.     your current changes.
  214.  
  215.     You may, at any time, revert to the installation defaults by deleting the
  216.     file called CONFIG.CDP in the working directory as, if the file is not
  217.     found by CDPlayer, it will be create using the default settings.
  218.  
  219.     The following is a summary of how each colour is used.
  220.  
  221.     a)  Handset background
  222.  
  223.         This colour is used to display the background for the handset, it
  224.         defaults to white on dark blue.  Any changes you make to this colour
  225.         will not be activated until the next time you run CDPlayer.
  226.  
  227.     b)  LCD text
  228.  
  229.         This colour is used to display the text on the LCD display, it
  230.         defaults to red.  Please note that this is only used to display the
  231.         text not the numbers.  The numbers are bitmaps and will always be red
  232.         on black.
  233.  
  234.     c)  Disc/track backound
  235.  
  236.         This colour is used to display the background of the area which shows
  237.         the name of the current disk and track, it defaults to white.
  238.  
  239.     d)  Disc/track text
  240.  
  241.         This colour is used to display the text in the area which shows the
  242.         name of the current disk and track, it defaults to black.
  243.  
  244. CDPlayer for Windows - (C)1993 Jupiter Software         Page 7
  245.  
  246.     Icon
  247.  
  248.     An option is available to set the minimize icon to always be shown over
  249.     your current application.  This option is set by a check box toggle in the
  250.     configuration dialogue box.  Select:
  251.  
  252.           File
  253.           Configure
  254.  
  255.     from the handset menu bar and the dialogue box will be displayed.  To the
  256.     right of the box is a check box labeled Keep icon on top.  If this box is
  257.     checked the icon will always show through when it is covered by another
  258.     window, if it is unchecked it will not.  Click on the item to toggle the
  259.     check on and off, then select OK to save your current settings.
  260.  
  261.     Font
  262.  
  263.     It is possible to change the font used for displaying the display area and
  264.     the disc and track details on the handset.  To do this select:
  265.  
  266.           File
  267.           Configure
  268.  
  269.     from the handset menu bar and the configuration dialogue box will  be
  270.     displayed.  To the right of the box is an area showing the current font,
  271.     point size and bold setting.  To amend the current setting, simply edit
  272.     the font name and point size and click on the check box to toggle bold on
  273.     and off.  Exiting the configuration window by clicking on OK will save the
  274.     new settings and change the display in the handset to reflect the changes
  275.     made.  Clicking on Cancel will abandon any changes made.
  276.  
  277.     If you enter an invalid font name the default font will be used.  If you
  278.     enter an invalid point size your changes will be ignored.
  279.  
  280.     Skip time
  281.  
  282.     The final option available on the configuration dialogue box, is to change
  283.     the number of seconds which are skipped when FF and Rew are pressed.  To
  284.     change these, open the dialogue by selecting:
  285.  
  286.         File
  287.         Configure
  288.  
  289.     The current setting is displayed at the bottom right of the dialogue window.
  290.     You may edit the current setting to reflect the time interval you would
  291.     like to use and click on OK to save your new settings.  Provided you have
  292.     entered a valid number, the new setting will be accepted and will take
  293.     immediate effect.
  294.  
  295. 3   Minimizing CDPlayer
  296.  
  297.     CDPlayer can be minimized to a CD icon at any time by cliking on
  298.     the Minimize button (top right of the window), or using the Control-menu
  299.     box (top left).  To use the Control-menu box, click on it and select
  300.     Minimize from the menu.
  301.  
  302.     CDPlayer will continue to play the CD while it is minimized --- all modes
  303.     including shuffle and custom programmes are supported in this state.  It
  304.     also diplays the current track number beneath the icon or the fact that
  305.     the CD has stopped.
  306.  
  307. 4   Closing CDPlayer
  308.  
  309.     CDPlayer can be closed at any time by selecting File from the menu bar and
  310.     then Exit.  You may also use the Control-menu box (top left).  Either
  311.     double click on the box or click on it once and select Close from the
  312.     menu.
  313.  
  314.     If a CD is being played when the program is closed, it will continue
  315.     playing until the last instruction issued to the drive is completed.  This
  316.     would have been to play the whole disk in Disk Mode or a single track in
  317.     any other mode.
  318.  
  319. 5   The CD Handset
  320.  
  321.     The handset is made up of four areas:
  322.  
  323.         Display -   showing the play mode, track being played
  324.                     and track and disc time elapsed and remaining.
  325.         Play controls - the ``buttons'' providing the controls normally
  326.                         available on a CD player.
  327.         Disc details -  an area showing the name and title of the music
  328.                         being played.  (This information is drawn from the
  329.                         database and will only be shown once the details have
  330.                         been entered.)
  331.         Database controls - ``buttons'' providing access to the CD database,
  332.                             and volume control.
  333.  
  334.     A small handset display is available which shows:
  335.  
  336.         Disc and track name
  337.         Four small control buttons for
  338.           Play
  339.           Stop
  340.           Pause
  341.           Eject
  342.         Volume control
  343.  
  344.     The operation of these controls follows the corresponding control on the
  345.     full handset, as set out in the following pages.
  346.  
  347.     To switch to the small handset select Small from the menu bar and it will
  348.     be displayed.  Selecting Full handset from the menu bar of the small
  349.     handset return to the full display.
  350.  
  351.     You may size the handsets, by dragging the boarders, and reposition them
  352.     by dragging the title bar.  CDPlayer will "remember" your changes and use
  353.     them the next time the program is launched.
  354.  
  355.     Note on volume control
  356.  
  357.     Not all drives support variable volume software control and on these
  358.     drives the volume will be constant if the volume slider is anywhere but
  359.     fully left, or the balance slider is fully to one side, when play will be
  360.     muted on one or both speakers.
  361.  
  362.  
  363. CDPlayer for Windows - (C)1993 Jupiter Software         Page 8
  364.  
  365. 6   Display Area
  366.  
  367.     The display area, at the top of the handset, is made up of
  368.     four lines of information relating to the current disc being played.
  369.  
  370.     Line 1
  371.  
  372.     To the left of line 1 is displayed the current mode of play, this can be
  373.     one of four modes:
  374.  
  375.         Disc            play the whole disc from the currently selected track
  376.         Track           play the selected track only
  377.         Shuffle Play    play the tracks on the disc in a random order.
  378.         Custom Play     play the tracks listed in the custom play field of the
  379.                         disc's record.
  380.  
  381.     To the right of line 1 the word ``Repeat" will be displayed if the
  382.     currently selected play mode is to be repeated, i.e.  repeat the whole
  383.     disc, the track or the custom programme.
  384.  
  385.      Line 2
  386.  
  387.     To the left of line 2 will appear one of the following:
  388.  
  389.         Stop        this will appear if the disc inserted is not currently
  390.                     being played
  391.         Play        this will appear if the disc is currently being played
  392.         Pause       this will appear if pause has been pressed
  393.         Working     this will appear momentarily when one of the function keys
  394.                     has been pressed
  395.         Reading     this will be displayed when the player is loading control
  396.                     data from the disc.
  397.         Error       this will be displayed if no disc is present in the first
  398.                     drive or if the drive is open.
  399.  
  400.     The remainder of line 2 simply contains headings for the information
  401.     displayed on lines 3 and 4.
  402.  
  403.     Line 3
  404.  
  405.     This line contains details of the track currently selected, or being
  406.     played, together with the playing time elapsed and that remaining for the
  407.     track.
  408.  
  409.     Line 4
  410.  
  411.     This line contains details of the amount of playing time which has elapsed
  412.     and is remaining for the disc.
  413.  
  414. 7   Function Buttons
  415.  
  416.     The second area of the handset shows the keys which are active when
  417.     CDPlayer is running.  To select a function, click on the relevant button
  418.     to ``press'' it.  The button will react and then gain focus, which is
  419.     shown by a dotted box appearing, and the operation will be executed.  It
  420.     is also possible to select a function by pressing the letter which is
  421.     underlined on the button, providing no buttons have focus.
  422.  
  423.     A third method of selecting each function is provided through the handset
  424.     menu bar.  To select a function using the menu, click on the menu, which
  425.  
  426. CDPlayer for Windows - (C)1993 Jupiter Software         Page 9
  427.  
  428.     will cause the display of the menu items, and then on the funciton name.
  429.     You may also use the letter underlined in the menu names in conjunction
  430.     with the Alt key, to select menus and items.
  431.  
  432.     The functions available are as follows:
  433.  
  434.     Play    Pressing this key will either play the whole of the disc from
  435.             the currently selected track, the selected track only, a custom
  436.             programme or a random programme, depending on the play mode (see
  437.             Mode below).
  438.  
  439.     Pause   Pressing this key will cause play to pause, and pressing the
  440.             key a second time will result in play continuing.
  441.  
  442.     Stop    Pressing this key causes play to cease.
  443.  
  444.     Eject   For drives which have an automatic eject and closing facility,
  445.             this key will either open or close the drive.  If a disk is being
  446.             played, play will cease and the disc will be ejected.
  447.  
  448.     Last    This key causes the system to move back to the previous track
  449.             on the disc based on the mode of play.
  450.  
  451.     Next    This key causes the system to move forward to the next track
  452.             on the disc based on the mode of play.
  453.  
  454.     Track   Pressing this key causes the system to present a dialog box from
  455.             which you can select the track to jump to.  Click on the track you
  456.             wish to play and then on OK.  If the disk is in play mode, play
  457.             will continue from the selected track.  If you do not wish to
  458.             select a new track click on Cancel or on OK without first
  459.             selecting a track from the list.
  460.  
  461.     Rept.   This key toggles repeat mode.  When repeat mode is on, ``Repeat"
  462.             is displayed on line 1 of the display, the current play mode will
  463.             repeat continuously until Rept.  is pressed again (or Stop is
  464.             pressed).
  465.  
  466.     Rew     Pressing this key causes the system to jump a number of seconds
  467.             earlier in the track.  This key is only effective while a CD is
  468.             being played and the number of seconds jumped is defined by
  469.             selecting Configure.
  470.  
  471.     FF      Pressing this key causes the system to jump a number of seconds
  472.             later in the track.  This key is only effective while a CD is
  473.             being played and the number of seconds jumped is defined by
  474.             selecting Configure.
  475.  
  476.     Again   Pressing this key, when a disc is being played, will cause the
  477.             system to play the currently selected track from the beginning.
  478.  
  479.     Mode    This key opens a dialogue box which lists the four modes of play,
  480.             with the current mode highlighted.  The four modes of play are:
  481.  
  482.             Disc    play the whole disc from the track currently selected.
  483.             Track   play the current track only.
  484.             Custom  play the tracks entered in the custom play field of the
  485.                     database record for the current disc.  Whenever a disc is
  486.                     inserted, the program identifies the disc and if a record
  487.                     exists for it, it will be loaded and any custom play
  488.                     programme will be available.
  489.             Shuffle Shuffle the tracks into a random order for playing.  If
  490.                     repeat is on when playing a disk in shuffle mode, the disk
  491.                     will be repeated played with the tracks shuffled into a
  492.                     different order on each repeat.
  493.  
  494.     To change the mode of play, click on the mode required, which will then be
  495.  
  496. CDPlayer for Windows - (C)1993 Jupiter Software         Page 10
  497.  
  498.     highlighted, and then click on OK.  Clicking on Cancel will return to the
  499.     handset laving the mode of play unchanged.
  500.  
  501.     If you select ``Custom play'' mode and no programme is recorded for the
  502.     disk, pressing Play will have no effect.  To play the disk you will have
  503.     to switch to one of the other play modes.
  504.  
  505.     The mode dialoge box can only be accessed if the CD drive is not actually
  506.     playing a disk.
  507.  
  508.     At the foot of the handset, four buttons are displayed:
  509.  
  510.     Data    Pressing this key will cause the system to display an edit screen
  511.             containing details relating to the disc currently inserted:
  512.  
  513.             1.  If a record already exists for the disc inserted in the drive
  514.                 the record will be loaded and offered for editing.
  515.  
  516.             2.  If a record does not exist for the disc inserted in the drive
  517.                 the system will load the track data from the CD and offer a
  518.                 blank record for a new record to be created.
  519.  
  520.     See the next section for details of the disc catalogue.
  521.  
  522.     Browse  Pressing this key causes the system to display a screen listing the
  523.             disks you have recorded in your catalogue.  You may scroll
  524.             through and edit the entries as described in the next section.
  525.  
  526.     Vol     This key provides access to a dialogue box containing two scroll
  527.             bars, one in respect of volume and the other balance.  The current
  528.             settings are shown by the correct ``thumb'' position.  To increase
  529.             the volume move the scroll marker to the right and to reduce the
  530.             volume move it to the left.  Balance adjusts the relative volume
  531.             between the left and right speakers.
  532.  
  533.             You may move the scroll position by pointing to the ``thumb''
  534.             marker, holding down the left mouse button and draging to the left
  535.             or right, or by clicking on the left or right arrows at the end of
  536.             the scroll bars.  You may also click on the bar to the left or
  537.             right of the ``thumb'' marker to obtain larger jumps.
  538.  
  539.             Please note that not all drives support software controled volume
  540.             and balance.
  541.  
  542. CDPlayer for Windows - (C)1993 Jupiter Software         Page 11
  543.  
  544. C. DISC CATALOGUE
  545.  
  546. CDPlayer provides a facility for maintaining and searching a catalogue of your
  547. CDs.  Whenever a CD is inserted in the drive, identifies the disc and
  548. determines whether or not a record exists in the database.  If a record is
  549. found it is loaded and any custom play programme is made available for
  550. playing.  If a record is not found will allocate a unique identification to
  551. the disc and determine the number of tracks and playing time of each.  It is
  552. possible to play CDs which do not have an entry in the database, however, the
  553. custom play facility will not be available until a record has been created.
  554.  
  555. 1   Entering/editing the record for the current disc
  556.  
  557.     When a disc is inserted in the drive, the system displays details
  558.     regarding the disc in the handset display and you may access the database
  559.     record for the CD by pressing Data - this will operate whether or not the
  560.     current CD is being played or is in ``stop mode".  On pressing Data the
  561.     Record Edit Screen will be displayed.
  562.  
  563.     If a record for the CD already exists it will be loaded and presented to
  564.     you for edit, if no record exists a blank record screen will be displayed
  565.     containing the total tracks on the disc, the total playing time and the
  566.     playing times for each track.
  567.  
  568.     Each record consists of the following:
  569.  
  570.         Disc name       up to 30 characters.  Records are sorted alphabetically
  571.                         by disc name when displayed in browse mode, see below.
  572.  
  573.         Composer/Artist this may be up to 30 characters and can be used to
  574.                         record the composer or artist.
  575.  
  576.         Music type      a field of 15 characters which you can use to identify
  577.                         the type of music, e.g.  baroque, romantic, pop etc.
  578.  
  579.         Custom play     this field is 30 characters long and contains the
  580.                         tracks to be played when custom play mode is selected.
  581.                         Tracks are identified by a number from 1 to 9 or a
  582.                         letter from A to K (representing tracks 10 to 20).
  583.                         To set up a custom play simply enter the track
  584.                         identifications one after the other in the order in
  585.                         which they are to be played.  For example if you wish
  586.                         to play track 7 followed by 10 and then 15, enter
  587.                         ``7AF".  You may repeat tracks within the sequence.
  588.  
  589.         Disc reference  a field of 15 characters in which you may record the
  590.                         reference by which you identify the disc.  It is
  591.                         sensible to allocate unique references to each of your
  592.                         discs as this field is displayed when browsing
  593.                         through your CD collection, thereby providing a means
  594.                         of identifying the disc you are seeking.
  595.  
  596.         Track details   you may enter a description of up to 60 characters for
  597.                         each track on the disc.  You may enter data in each of
  598.                         the track fields shown even if there is no corresponding
  599.                         track on the disk.  This enables you to store general
  600.                         information about the CD, if you wish.  When browsing
  601.                         through your CD catalogue, ``word filter" searches all
  602.                         fields within a record including track details, it is
  603.                         therefore possible to search for a particular track
  604.  
  605. CDPlayer for Windows - (C)1993 Jupiter Software         Page 12
  606.  
  607.                         and then identify the disc on which it resides.  See
  608.                         section on browsing below.
  609.  
  610.         Disc ID         A Unique 8 digit hex string allocated by CDPlayer to
  611.                         identify each disc.
  612.  
  613.     The system allows you to record details of up to 30 tracks for each CD.
  614.     Two edit screens are provided, one for discs with 15 or less tracks and
  615.     one for those with over 15 tracks.  The edit screen for the the former,
  616.     displays the track list in a single column while that for the latter uses
  617.     a two column format.
  618.  
  619.     On accessing the record, the entry field will be positioned by Disc name.
  620.     Enter or edit the name of the disc (if you try and enter more than 30
  621.     characters the system will beep) and press Tab to move to the
  622.     Composer/Artist.  field.  You may continue entering the fields one at a
  623.     time and on completing the entry for the final track the focus will move
  624.     to OK then to Cancel from which it will move back to Disc name.
  625.  
  626.     You may move from field to field by pressing the Tab and Shift+Tab keys,
  627.     or by clicking on the field to be edited.
  628.  
  629.     Editing of the text within each field follows the standard Windows format.
  630.     Home and End moves to the beginging and end of the field, cursor keys move
  631.     left and right, Delete deletes the character at the cursor position and
  632.     backspace is destructive.  If a group of characters are highlighted in
  633.     blue, which the whole of each field will be when it receives focus, they
  634.     will be deleted if a single character is pressed to replace them or Delete
  635.     is pressed.  A group of characters may also be highlighted by dragging the
  636.     cursor.
  637.  
  638.     When you have finished entering or editing the record click on OK to save
  639.     the changes you have made to disk.  Clicking on Cancel instructs the
  640.     system to discard the changes you have made and leave the original record
  641.     intact, if one existed.
  642.  
  643. 2   Browsing through your catalogue
  644.  
  645.     Pressing Browse on the handset accesses the Browse Screen.
  646.  
  647.     The Browse Screen is divided into three areas as follows:
  648.  
  649.         Menu bar            taking up the first line
  650.  
  651.         Catalogue display   showing 20 or 21 entries from the database at
  652.                             a time
  653.  
  654.         Message bar         displayed at the foot of the screen if Word Filter
  655.                             has been used in the current run.
  656.  
  657.     On accessing the Browse Screen, the first twenty-one entries in your
  658.     database, based on a alphabetical sort of the disc name, will be
  659.     displayed.  (If no entries are displayed and the system beeps, your
  660.     database does not contain any records.) Each line contains the following:
  661.  
  662.         Disc name
  663.         Composer
  664.         Music type
  665.         Disc reference
  666.         The number of tracks on the disc
  667.         Total playing time
  668.         Custom play programme
  669.  
  670.     The information displayed is too wide for the window and a scroll bar is
  671.     incorporated at the foot of the window to allow you to scan the
  672.     information.
  673.  
  674.     You may size the browse screen, by dragging the boarders, and reposition them
  675.     by dragging the title bar.  CDPlayer will "remember" your changes and use
  676.     them the next time the program is launched.
  677.  
  678.     When the Browse Screen is displayed, the first entry will be highlighted.
  679.     You may scroll through your CD catalogue using the vertical scroll bar or
  680.  
  681. CDPlayer for Windows - (C)1993 Jupiter Software         Page 13
  682.  
  683.     using the following keys:
  684.  
  685.         Page up     Pressing Page up will cause the list to scroll back a
  686.                     screen of records.
  687.  
  688.         Page down   Pressing Page down will cause the list to scroll forward a
  689.                     screen of records.
  690.  
  691.         Up Arrow    Pressing Up Arrow moves the highlight bar to the previous
  692.                     record, scrolling the list back if necessary.
  693.  
  694.         Down Arrow  Pressing Down Arrow moves the highlight to the next record,
  695.                     scrolling the list forward if necessary.
  696.  
  697.         Home        Pressing Home displays the extreme left of the record
  698.                     lines.
  699.  
  700.         End         Pressing End displays the extreme right of the record
  701.                     lines.
  702.  
  703.         Ctrl+Home   Pressing Ctrl+Home displays the first 20 entries in the
  704.                     list.
  705.  
  706.         Ctrl+End    Pressing Ctrl+End displays the last 20 entries in the list.
  707.  
  708.     Goto section
  709.  
  710.     It is possible to jump to the start of each section of the alphabet by
  711.     pressing the letter on the keyboard.
  712.  
  713.     Status
  714.  
  715.     You may discover the total number of CDs recorded in your catalogue by
  716.     selecting Status from the file menu.
  717.  
  718.     Word Filter
  719.  
  720.     Selecting Filter toggle from the menu bar will cause the system to request
  721.     the entry of a filter string, with the prompt Enter filter string.  The
  722.     filter string can be up to 30 characters long and may be a single word or
  723.     a group of words.  After entering the string, click on OK to activate
  724.     filtering or on Cancel to abort the request.  On accepting a string the
  725.     system will redisplay the browse list containing only those records which
  726.     contain the string entered.  The string may be present within any field
  727.     and case is ignored.
  728.  
  729.     You may use the word filter to, for example, display all music by Mozart.
  730.     This will result in all discs being listed which contain Mozart in any
  731.     field, e.g.  as the composer or within track details.  It will therefore
  732.     pick up any compilation discs which include Mozart music.  Once the list
  733.     is displayed you may scroll through the filtered list in the same way as
  734.     you scroll through the full list.  Filtering is deactivated by selecting
  735.     Filter toggle for a second time or by exiting from the Browse Window.
  736.  
  737.     While filtering is active a message is diplayed at the foot of the filter
  738.     window giving details of the filter string in use.
  739.  
  740.     Exit From Browse Mode
  741.  
  742.     You exit from the Browse Window by selecting Exit from the menu bar, or
  743.  
  744. CDPlayer for Windows - (C)1993 Jupiter Software         Page 14
  745.  
  746.     using the control-menu box.
  747.  
  748. 3   Editing during browsing
  749.  
  750.     When browsing through your database, a record may be selected
  751.     for viewing or editing by highlighting it on the Browse Screen and
  752.     selecting Edit from the Edit menu, or by double clicking on the entry.  The
  753.     Record Edit Screen will be displayed, showing the information currently
  754.     recorded.  You may edit the selected record, if required, in the same way
  755.     as the current disc is edited, see previous section.
  756.  
  757. 4   Deleting a record
  758.  
  759.     If you wish to delete a record, highlight it in the Browse Window
  760.     and select Delete from the Edit menu.
  761.  
  762.     A window will be displayed asking for confirmation that you wish to
  763.     delete the record.  If you do wish to remove the data, click on Yes and it
  764.     will be deleted.  Clicking on No will leave the entry in the database.
  765.  
  766. 5   Rebuilding the database index
  767.  
  768.     It is possible your database indexes may become corrupt.  This is not
  769.     likely to happen very often, but loss of power to the system while the
  770.     indexes are being updated is one event which will definitely corrupt the
  771.     data.  An option has therefore been included under the File menu of the
  772.     full handset to enable you to rebuild the index at any time.  The system
  773.     will also suggest the rebuilding of the indexes if it detects that the
  774.     data is not correct.
  775.  
  776.     To rebuild the index, select File from the menu bar, followed by Rebuild
  777.     database index.  A window will open asking you to confirm that you would
  778.     like the indexes rebuilt.  Clicking on Yes will cause the system to
  779.     proceed, while selecting No will abort the process.
  780.  
  781. 6   Export data
  782.  
  783.     The information stored in the CD catalogue may be exported in one of two
  784.     formats:
  785.  
  786.           Record format       Where each field is written to the file on a
  787.                               separate line, each record occupying a fixed
  788.                               number of lines. (press X)
  789.  
  790.           CSV                 Where the whole record is written on one line in
  791.                               Comma Separated Variable format. (press V)
  792.  
  793.     In both cases the order of the record is as follows:
  794.  
  795.                     Disc ID
  796.                     Name
  797.                     Composer/artist
  798.                     Music type
  799.                     Custom play
  800.                     Disc reference
  801.                     30 track titles
  802.  
  803.     On selecting the appropriate option form the File menu of the full
  804.     handset, you will be presented with the Save As dialog box.
  805.  
  806.     Enter the full path and name and click on OK.  If you select the option
  807.     but do not wish to proceed, clicking on Cancel will abort the routine and
  808.     return you to the handset.
  809.  
  810.     If the file already exists you will informed of this fact and asked to
  811.     confirm that you wish to proceed.
  812.  
  813.     A count of the records being exported is displayed as the file is created
  814.     and on completion a message indicating that the process was successful.
  815.  
  816. 7   Import data
  817.  
  818.     Data may be imported from a file stored in Record Format, see above.  The
  819.     system uses the Disc ID to identify records and if the ID already exists
  820.     in the database the record will be updated, if it does not exist a new
  821.     record will be created.  You may use this facility to merge multiple
  822.     databases.
  823.  
  824.     On selecting the import data option from the File menu of the full
  825.     handset, you will be presented with the Open File dialog box.
  826.  
  827.     Enter the full path and name and click on OK.  If you select the option
  828.     but do not wish to proceed, clicking on Cancel will abort the routine and
  829.     return you to the handset.
  830.  
  831.     If the file does not exist, or is not in the correct format, a message
  832.     will be displayed.  If the file is acceptable, the data will be imported
  833.     and a progress message displayed.  When the import is complete a message
  834.     to this effect will be displayed.
  835.  
  836.     If any new records are added during an import they will not contain
  837.     details of track time, and the total number of tracks may not be correct
  838.     as this will be based on the track titles recorded.  However, both the
  839.     track times and the total number of tracks will be updated by the system
  840.     on the first occasion that the CD is loaded and the data record accessed.
  841.  
  842. 8   Open File Window
  843.  
  844.     When you select an option that requires you to enter the name of a file to
  845.     open or load, the system will open the Open File dialog window.
  846.  
  847.     Type a file name, or select a name from the files box, and select OK.  If
  848.     the file you want has an extension other than that used as the default,
  849.     type an asterisk (*), a period, and the extension (e.g. *.TXT), then
  850.     choose OK to see a list of files with the extension in the files box.
  851.  
  852.     If the file is not in the current directory, or on the current drive,
  853.     select the drive or directory you wish to use, from the directory box, and
  854.     click OK.
  855.  
  856.     If you do not wish to continue to select a file to use, select Cancel.
  857.  
  858. 9   Save as Window
  859.  
  860.     When you select an option that requires you to enter the name of a file to
  861.     save, the system will open the Save As dialog window.
  862.  
  863.     Type a file name and select OK.
  864.  
  865.     If you do not wish the file to be stored in the current directory, or on
  866.     the current drive, select the drive or directory you wish to use, from
  867.     the directory box, and click OK.
  868.  
  869.     If you do not wish to continue to select a file to use, select Cancel.
  870.  
  871. IMPORTING AN EXISTING CD DATABASE
  872.  
  873. A facility is included to allow you to automate the import of an existing
  874. database, allowing CDPlayer to attach your existing details to its internally
  875. calculated disc id.
  876.  
  877. To do this proceed as follows:
  878.  
  879. 1       Create an export file from your existing database in record format.
  880.         Be sure to allocate a unique 8 digit Hex string to each disc and
  881.         include this as the disc id.  At this point it does not matter what
  882.         that string is, you could start at "00000001" and increment by 1 for
  883.         each disc, or use the id created by your existing player.
  884.  
  885. 2       Launch CDPlayer.
  886.  
  887. 3       Import the data into CDPlayer.
  888.  
  889. 4       Enter each disc in turn then:
  890.                 Select Browse
  891.                 highlight the record which corresponds to the disc
  892.                 Select Edit
  893.                 Select Attach record to current disk
  894.  
  895.         If you have selected the correct record, confirm that this is the case
  896.         and the disc id for the currently inserted disk will be allocated to
  897.         the record.  Details of track times will also be updated to complete
  898.         the record.
  899.  
  900. If the disc inserted is already recorded in the database you will be informed
  901. of this fact.  If no disc is in the drive an error message will be shown.
  902.  
  903. You do not have to "link" the records to the correct disc in one session, you
  904. could do this over a period of time as and when you play the discs.
  905.  
  906.  
  907. CDPlayer for Windows - (C)1993 Jupiter Software         Page 15
  908.  
  909. D. INSTALLATION
  910.  
  911. An automated installation routine is provided on the disk.  To run this
  912. routine insert the disk in your floppy drive, launch Windows and select File
  913. from the Program Manager menu bar, followed by Run...  and enter:
  914.  
  915.           A:SETUP          <Enter>
  916.  
  917. and click on Continue.  (``A" will either by ``A" or ``B" depending on the
  918. drive being used.)
  919.  
  920. The install program will install for windows in a directory called CDPLAYER
  921. on drive C by default, create a Program Group called Jupiter and create a
  922. Program Item for You may change the default directory during installation but
  923. if you do the system will not register CDPlayer's icon, you will have to do
  924. this manually.
  925.  
  926. To register CDPlayer's icon (if it is not shown in the Program Group)
  927.  
  928.         Make sure the Program Item has Focus by clicking on it
  929.  
  930.         Click on File and then Properties
  931.  
  932.         Click on Change Icon and use Browse to locate the program, which is
  933.         called PLAYER.EXE and will be in the directory you selected for
  934.         installation.  Select the program and accept the CD icon.
  935.  
  936. You may launch by double clicking on the icon in the Jupiter Program Group.
  937.  
  938. If you place CDPlayer for Windows in the same directory as for CDPlayer for
  939. DOS, they will share the same database files.  Alternatively, you may use the
  940. configuration options to inform for CDPlayer for Windows where to find the
  941. data files used by the DOS version.  The programs use a common file structure
  942. and this will not cause any damage to your data.
  943.  
  944. To update a shareware or earlier installation, simply copy PLAYER.EXE from the
  945. issue disk to the directory containing your shareware version of the program.
  946.  
  947.